ECU Chip Tunning


ECU Chip Tunning Tool

chinacardiags.com : special offer professional ecu reading and programming tools,ECU programmer can read the ECU data and program ECU, such as ktm bench, kess v2, ktag, fgtech, iprog, carprog, Original Wellon VP380 VP-380 Programmer, SMPS MPPS V5,BDM100,ORV 4-in-1 COMMANDER,KWP2000,XPROG-M Programmer V5.0,MC68HC11 Motorola .These ECU programmers work on most car brands.But,which one is best suitable for you,it need to check the support car list.
BEST
V86 Iprog+ Iprog Pro Programmer Support IMMO + Mileage Correction + Airbag Reset to 2019 Replace Carprog/Digiprog 3/Tango

V86 Iprog+ Iprog Pro Programmer Support IMMO + Mileage Correction + Airbag Reset to 2019 Replace Carprog/Digiprog 3/Tango

US$109.00
  • Item No. SE147
  • Free Shipping

Iprog+ Iprog Pro Programmer Support IMMO + Mileage Correction + Airbag Reset till the year 2019 Replace Carprog/Digiprog 3/Tango
www.ChinaCarDiags.com provides you with best price, high quality and one year warranty with free technique services.

BEST
(US/UK/EU Ship No Tax) 2021 GODIAG GT100 OBDII 16PIN Protocol Detector Breakout ECU Connector

(US/UK/EU Ship No Tax) 2021 GODIAG GT100 OBDII 16PIN Protocol Detector Breakout ECU Connector

US$99.00
  • Item No. SO537
  • Free Shipping

Supports OBDII 16PIN protocol communication detection and ECU maintenance, diagnosis, programming, coding.
Convert the car OBD2 interface into banana plug 16 pin for signal detection and electrical level conversion.
Detect car communication is table or not, by working with any diagnostic tool.
Supply power to the car when changing battery.

BEST
[UK/US Ship No Tax] CARPROG FULL V8.21 Firmware Perfect V8.21 Online/V10.93 Offline with All 21 Adapters Including Much More Authorization

[UK/US Ship No Tax] CARPROG FULL V8.21 Firmware Perfect V8.21 Online/V10.93 Offline with All 21 Adapters Including Much More Authorization

Latest price:US$79.99
US$69.9913% off
  • Item No. SE53-B1
  • Free Shipping

1.Newest Firmware V8.21 CARPROG, with All 21 Adapters
2.It contain much more authorization than V4.74 or other low version CARPROG.
3.Packed with both software V8.21 and V10.93, software V8.21 needs activation but you will automatically get token renew after it used up.
www.ChinaCarDiags.com provides you with best price, high quality and one year warranty with free technique services.

BEST
(UK Ship No Tax) Best V2.70 KESS V2 V5.017 Red PCB Firmware Supports Online Added 140 Protocol No Token Get Free ECM TITANIUM

(UK Ship No Tax) Best V2.70 KESS V2 V5.017 Red PCB Firmware Supports Online Added 140 Protocol No Token Get Free ECM TITANIUM

Latest price:US$94.99
US$85.0011% off
  • Item No. SE137-C1
  • Free Shipping

KESS 5.017 Red PCB Firmware, Supports Online Added 140 Protocol ,No Token Limited,free shipping with best price.Best Quality

NEW!
[US/UK/EU Ship] 2021 GODIAG BMW CAS4 CAS4+ Test Platform Plus GT100 AUTO TOOLS OBD II Break Out Box ECU Connector

[US/UK/EU Ship] 2021 GODIAG BMW CAS4 CAS4+ Test Platform Plus GT100 AUTO TOOLS OBD II Break Out Box ECU Connector

US$149.00
  • Item No. SO537+SK310
  • Free Shipping

GODIAG GT100 with BMW CAS4 & CAS4+ Test Platform can program new key when all keys lost, add new key and replace CAS4 / CAS4+ ECU module by working together with Xhorse VVDI2, VVDI BIM Tool Pro, Lonsdor k518 and Autel im608 etc.

KTM Flash KTM Bench KTM OBD1.20 3 in 1 ECU Programmer Update Version of KTM Bench V1.20

KTM Flash KTM Bench KTM OBD1.20 3 in 1 ECU Programmer Update Version of KTM Bench V1.20

Latest price:US$399.00
US$359.0010% off
  • Item No. SE153
  • Free Shipping

KTMFLASH KTMBENCH KTMOBD 3 in 1 ECU Programmer covers all functions of ktm flash, ktm bench and ktm obd.

NEW!
[US/UK/EU Ship] GODIAG GT100+ GT100 Plus OBDII Breakout Box with Electronic Current Display

[US/UK/EU Ship] GODIAG GT100+ GT100 Plus OBDII Breakout Box with Electronic Current Display

US$119.00
  • Item No. SO537-B
  • Free Shipping

Godiag GT100 Plus is update of GT100, it added Electronic Current Display. Godiag GT100+ is the latest testing platform for OBDII protocol communication detection and ECU maintenance. It is OBDII Breakout BOX and also is ECU Bench Connector.

2021 Latest V2.25 KTAG ECU Programming Tool Firmware V7.020 KTAG Master Version with Unlimited Token Free Shipping (UK Ship No Tax)

2021 Latest V2.25 KTAG ECU Programming Tool Firmware V7.020 KTAG Master Version with Unlimited Token Free Shipping (UK Ship No Tax)

US$69.99
  • Item No. SE135-B
  • Free Shipping

1. With latest Firmware version: V7.020
Software version: V2.25
2. Add ECU Type: Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU,Toyota 76F, and so on, at least 100 more ECU Types added.
3. No tokens limitation
4. can do all the functions for KTM100 KTAG V7.003
www.ChinaCarDiags.com provides you with best price, high quality and one year warranty with free technique services.

V54 FGTech Galletto 4 Master BDM-Tricore-OBD Function ECU Programmer With Multi Language (UK Ship No Tax)

V54 FGTech Galletto 4 Master BDM-Tricore-OBD Function ECU Programmer With Multi Language (UK Ship No Tax)

US$49.99
  • Item No. SE61-G
  • Free Shipping

FG Tech Galletto 2-Master V54 BDM-OBD is a famous chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode, checksum. This item cannot only work as fgtech galletto 4-Master, but can also work for BDM-OBD.
www.ChinaCarDiags.com provides you with best price, high quality and one year warranty with free technique services.

V10.93 VSCAN Carprog with all Software activated and all 21 items Adapters (Support US Local Shipping)

V10.93 VSCAN Carprog with all Software activated and all 21 items Adapters (Support US Local Shipping)

US$84.99
  • Item No. SE53-1
  • Free Shipping

CARPROG FULL V10.93(with all Software's activated and all 21 items Adapters), was designed with regard to demands of our customers to have universal tool for car radios, dashboards, immobilizers repair including advanced functions like EEPROM and microcontroller programmer.
www.ChinaCarDiags.com provides you with best price, high quality and one year warranty with free technique services.

HOT!
2021 V1.20 KTM bench boot ECU Programmer Can read ECU without removing the cover (UK Ship No Tax)

2021 V1.20 KTM bench boot ECU Programmer Can read ECU without removing the cover (UK Ship No Tax)

US$259.00
  • Item No. SE148
  • Free Shipping

KTM bench boot Can read ECU  without removing the cover ECUs covered

Best V2.25 Online KTAG EU Firmware V7.020 K-TAG Master with Red PCB No Tokens Limitation Free Send ECM software (UK Ship No Tax)

Best V2.25 Online KTAG EU Firmware V7.020 K-TAG Master with Red PCB No Tokens Limitation Free Send ECM software (UK Ship No Tax)

US$99.00
  • Item No. SE135-B1
  • Free Shipping

V7.020 KTM100 KTAG ECU Programming Tool Master software V2.25 with Unlimited Token
Available Protocols: BDM MOTOROLA MPC5xx
Easy to use, automatically recognize ECU model, high stability.
Multi-Language available:Italian Deutsch English French Portuguese Spanish

BIG SALE
V54 FGTech 0386 Galletto 4 Master BDM-OBD Function (US Ship No Tax)

V54 FGTech 0386 Galletto 4 Master BDM-OBD Function (US Ship No Tax)

US$54.99
  • Item No. SE61-GB

1. FG Tech Galletto 2-Master V54 BDM-OBD
2. Works for almost all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode, checksum
3. Works as both fgtech galletto 4-Master and BDM-OBD

[US Ship] New 4LED Red PCB KTAG 7.020 EU Online Version SW V2.25 No Token Limited Support Full Protocols

[US Ship] New 4LED Red PCB KTAG 7.020 EU Online Version SW V2.25 No Token Limited Support Full Protocols

Latest price:US$99.00
US$89.0010% off
  • Item No. SE135-E
  • Free Shipping

New Update Red PCB EU Version Ktag V7.020 with 4 LED Indicator on PCB. KTAG 7.020 add new color GPT Cable for GPT Function. Our KTAG v7.020 can easily read and decrypt the secret password and it automatically unlocks/unprotects the Tricore sectors so it can read and write both Flash and Eeprom.

Vagtacho USB Version V 5.0 VAG Tacho For NEC MCU 24C32 or 24C64 (US Ship No Tax)

Vagtacho USB Version V 5.0 VAG Tacho For NEC MCU 24C32 or 24C64 (US Ship No Tax)

US$29.99
  • Item No. SE77-b
  • Free Shipping

VAG Tacho USB Version V 5.0

New Xprog V6.12 XPROG-M ECU Programmer With USB Dongle DHL Free Shipping

New Xprog V6.12 XPROG-M ECU Programmer With USB Dongle DHL Free Shipping

Latest price:US$139.00
US$125.0010% off
  • Item No. SM53
  • Free Shipping

1. Latest software version V6.12 with USB Dongle, No need activation.
2. Add new authorization: AUTH-0028-3 Renesas RL78 Authorized and AUTH-0028-4 Renesas M32C Authorized
3. Operating system: WinXP/ Win7/ Win8

Iprog+ V86 Iprog Pro Programmer With 7 Adapters Support IMMO + Mileage Correction + Airbag Reset Replace Carprog

Iprog+ V86 Iprog Pro Programmer With 7 Adapters Support IMMO + Mileage Correction + Airbag Reset Replace Carprog

Latest price:US$119.00
US$109.008% off
  • Item No. SE147-B
  • Free Shipping

Iprog+ V86 Iprog Pro with 7 adapters Support IMMO + Mileage Correction + Airbag Reset till the year 2019

Mercedes ME9.7 ECU ECM Engine Computer Compatible with All Series of 272/273 Engine 4.6L 4633CC V8/5.5L5641CC V8 Support online scn coding

Mercedes ME9.7 ECU ECM Engine Computer Compatible with All Series of 272/273 Engine 4.6L 4633CC V8/5.5L5641CC V8 Support online scn coding

Latest price:US$299.00
US$269.0010% off
  • Item No. SO449
  • Free Shipping

Mercedes ME9.7 ME 9.7 ECU ECM Engine Computer

OEM Orange5 Professional Programming Device With Full Packet Hardware + Enhanced Function Software

OEM Orange5 Professional Programming Device With Full Packet Hardware + Enhanced Function Software

Latest price:US$149.00
US$129.0013% off
  • Item No. SE125-B
  • Free Shipping

Orange 5 programmer is a professional programming device for memory and microcontrollers. Unique feature of the current series programmers is built-in macro language for writing down protocols, which gives fast and easy capability to add new types of micro schemes, precisely meeting manufacturers' requirements to read/write algorithms.

(US/UK Ship No Tax) V1.20 KTM BENCH ECU Programmer for BOOT and Bench Read and Write

(US/UK Ship No Tax) V1.20 KTM BENCH ECU Programmer for BOOT and Bench Read and Write

Latest price:US$259.00
US$249.004% off
  • Item No. SE148-B
  • Free Shipping

KTM bench boot can read and write ECU via Boot & Bench (no need to open the cover), it is a cheap alternative compared with the expensive original one.

Total 185 items, 20 items/p, current page 1/10.